| Engine power: | 15 h.p. |
| Engine | LIFAN – gas |
| Category of soil: | Up to 9 |
| Мах. Initial diameter: | 300 mm |
| Drilling depth: | |
| With water flush: | Up to 70 m |
| With air (compressor): | Up to 30 m (depends on compressor power) |
| By auger ø130: | Up to 10 m (depends on auger’s diameter) |
| Rotary Head: | |
| Torque | 750 Nm |
| Rotation speed: | 0-100 rev/min |
| Pulling force up: | 3900 kg |
| Pulling force down: | 2600 kg |
| Head travel: | 1680 mm (drilling pipe 1.5 m) |
Application field
- Drilling water wells
- Geothermal drilling
- Engineering explore
Advantages of our drilling rigs
Guides on the mast
The presence of the guides will not allow the rod of the hydraulic cylinder to bend at high load during extraction and prevents breakage of the hydraulic cylinder.
Support unit hydraulic motor
Prevents damage to the hydraulic motor due to axial loads, takes all the loads from the drill string on the supporting bearings, not the hydraulic motor.
Support unit hydraulic motor
Prevents damage to the hydraulic motor due to axial loads, takes all the loads from the drill string on the supporting bearings, not the hydraulic motor.
The pressure regulator on the bottom
Allows you to smoothly adjust the axial load on the bit during drilling, which allows to increase the rate of penetration.
Regulator of the flow of hydraulic fluid
Allows you to smoothly adjust the speed of rotation of the drill string to work with different types of rock breaking tool in a variety of soils, preventing breakage of the drilling tool.
Regulator of the flow of hydraulic fluid
Allows you to smoothly adjust the speed of rotation of the drill string to work with different types of rock breaking tool in a variety of soils, preventing breakage of the drilling tool.
